Tenergy LIPO Battery Charger & Adapter

Tenergy LIPO Battery Charger & Adapter

The best ALL-IN-ONE Universal Charger on the market!

Various Connectors Supported:

• Hitech
• JST
• Deans
• Tamiya
• Traxxas

No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported. Supports multiple types of battery packs with one single charger! The follow packs are supported:

• NiMH/NiCD 1~15 cells ( 1.2v to 18v)
• Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v)
• Li-Fe 1~6 series
• Sealed Lead Acid (SLA)

Tenergy Charger Specifications:

• Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
• Build-in Balance
• Temperature Sensor
• DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.

Tenergy 90252 Charger Specification

• Operating voltage - DC 11~18 volts/AC 100~240V, 50/60Hz
• Charge/discharge power - max. 50/5 Watts
• NiCd/MH - 1~15 cells
• LiIo/LiPo/LiFe - 1~6 series
• Pb - 2~20V
• Charge current - 0.1 to 5.0A
• Discharg current - 0.1 to 1.0A
• No. of cycle - 1 to 5 times
• Battery data memory - up to 5 data
• Weight - 1000g
• Dimension - 160x120x40 mm

Tenergy charger User's setting-up parameters

• Battery voltage type - LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
• NiCd Delta-peak voltage sensitivity - 1 to 20mV
• NiMH Delta-peak voltage sensitivity - 1 to 20mV
• Battery temperature cut-off - 20 to 80C or OFF
• Waiting time between charge/discharge - 1 to 60 min.
• Integral timer limit for safety - 10 to 720 min.or OFF
• Maximum charging capacity limit for safety - 10 to 9990mAh or OFF
• Key beep and buzzer sound - ON/OFF
• Input DC power low alert - 10 to 11V